Food truck inventory list: what to count before you roll
A food truck inventory list covers everything the truck needs for a full shift, area by area: cold food, dry goods, sauces, drinks, paper goods, cleaning supplies and fuel. Check each item against a par for the shift, and load or order the gap before you leave.
What goes on a food truck inventory list?
A food truck inventory list is every item you need to serve one full shift. On a truck, you cannot walk back to the cooler for more. If it is not on board, you do not have it. So the list has to be complete.
Group the list by where things live on the truck. Then the count follows your hands, shelf by shelf, and nothing gets skipped.
- Cold food. Meat, cheese, produce, prepped sauces and anything in the reach-in or the cooler.
- Frozen food. Fries, frozen meat and backup bread.
- Dry goods. Rice, flour, oil, spices, buns and tortillas.
- Sauces and toppings. The bottles on the line and the backups behind them.
- Drinks. Cans, bottles, ice, and the cups for them.
- Paper and to-go. Boxes, bags, foil, napkins, forks and gloves.
- Cleaning. Soap, sanitizer, towels and trash bags.
- Truck supplies. Propane, generator fuel, fresh water and spare fuses.
Your list will be longer than this. Start with your menu. Every ingredient in every dish goes on it, plus everything you hand to a guest.
How do you count the truck before a shift?
Count at the same point every time, before you load, and in the same order. Use the truck’s own layout as your path.
- Start on the cold side. Count the cooler and reach-in first, so the doors are open for less time.
- Move to dry storage and the line. Count full packs and open packs apart.
- Count paper and cleaning. These run out quietly and stop service just as fast as food.
- Check the truck supplies. Fuel, propane and water.
- Compare to par. Anything under par goes on the load list from storage, or on the next order.
Pick Chef Maya in the pretend kitchen and say “We’re low on limes.” Try the demo
Keep the count short. A quick count you do every shift beats a perfect count you skip. Once a week, do a full count of the truck and storage together. Our inventory count routine shows a quick way to run it.
How do you set pars for a truck?
A par is the amount you want on hand. On a truck, it helps to set two kinds.
- Truck par. What must be on board for one shift. Base it on a busy shift, since you cannot restock in the middle of service. The space on the truck sets the ceiling.
- Storage par. What you keep at your commissary or storage kitchen to refill the truck until the next delivery.
For each item, think about your busiest shift, how many shifts until the next delivery, and a small cushion. Our guide on how much to order walks through the math.
| Item | Busy shift use | Truck par | Storage par |
|---|---|---|---|
| Buns | 120 | 140 | 300 |
| Chicken thighs | 30 lb | 35 lb | 80 lb |
| To-go boxes | 150 | 175 | 500 |
| Propane | 1 tank | 2 tanks | 1 spare tank |
These numbers only show the idea. Yours come from your own shifts and your own truck. Check your truck pars every month or two. A new menu item, a new stop or a change in season can make the old numbers wrong.
How do you restock the truck after a shift?
The best time to plan tomorrow is right after today. You know what ran low, and it is fresh in your mind.
- Count what is left on the truck. Same path as the morning count, so it goes fast.
- Write the load list. For each item, the gap between what is left and the truck par.
- Check storage before you order. Load from storage first. Only the items storage cannot cover go on the order.
- Load dry goods first and cold food last. Cold food spends less time out of the cooler that way.
- Look at tomorrow’s stop. A big event or a slow weekday changes the load. Adjust before you roll, not after.
Write down anything that ran out during service, with the time. Running out at the end of a shift is fine. Running out in the first hour means the truck par is too low.
What do food trucks forget to count?
- Paper goods. Running out of boxes ends service as fast as running out of chicken.
- Ice. It melts, and it goes into drinks and into keeping food cold.
- Gloves and sanitizer. You need them every shift, and they are easy to miss.
- Event extras. A big event needs more of everything. Raise pars for that day only.
- What is already in storage. Count both places before you order, or you buy what you already have.
- Small tools. Tongs, a spare thermometer, a lighter and extra pans. One lost pair of tongs can slow the whole window.
Write these at the bottom of your list, so the last thing you see before you roll is the stuff people forget.
How does Heard help a food truck?
Heard is a kitchen app you talk to. Say the counts out loud, or tap them. Say “low on buns” and Heard marks them low and puts them on the next order, with the reason.
Heard keeps working with no signal. Changes stay on the device and send when the signal comes back. A chip at the top tells you what saved. Read more on the no signal page, or see Heard for food trucks.
Good to know: Heard keeps one stock list. The truck and a storage kitchen are not split. You can start a 30-day free trial of Heard from the pricing page while our first 10 places last.
The demo is a pretend restaurant. Try the demo, pick Chef Maya, and say “We’re low on limes.” Buns work the same way.
Quick questions
What should be on a food truck inventory list?
Every ingredient on your menu, plus drinks, paper and to-go goods, cleaning supplies, and truck supplies like propane, fuel and water.
How often should a food truck count inventory?
Before and after every shift for the items that can stop service, and a full count of the truck and storage once a week.
How do I set par levels for a food truck?
Set a truck par for one busy shift and a storage par that refills the truck until the next delivery, each with a small cushion.
Free tools: Plate cost calculator, Par level calculator