Recipe costing: yield, trim and sauces made in batches

The short answer

Recipe costing is working out what a dish costs to make, using the part of each food you can really use, not the part you bought. Cost the batch first, then the plate that uses it, and do it again when a price moves.

What does recipe costing add to a plate cost?

A plate cost adds up the parts on one plate. Recipe costing goes one step further. It asks what each part really costs once you cut it, cook it, and portion it.

Our plate cost post covers the basic sum. This post covers what that sum can hide. That is yield and trim, sauces made in a batch, portion size, and prices that move.

Skip these and your costs come out too low. A dish that looks fine on paper loses money in the pan.

How do yield and trim change a cost?

You pay for the whole case. You cannot serve the whole case. Trim is the part you cut away, and yield is the part you can use. So the price of a usable pound is higher than the price on the invoice. Here is a made-up example with romaine.

Example: how trim changes the price, made-up numbers, not typical
WhatExample amountExample cost
Bought20 lb of romaine$30.00
Price paid per pound$1.50
Trim cut away6 lb
Usable after trim (the yield)14 lb70% of what was bought
Price per usable pound$2.14
Try it here
Heard. Juniper burger costs about $4.62 a plate. That's 27.2% of the $17.00 price.

Pick Chef Maya in the pretend kitchen and say “What does the burger cost us?” Try the demo

Use the last line in your recipe. If you cost the lettuce at the invoice price, every salad looks cheaper than it is.

How do you find your own yield?

Do not copy a number from a book. It depends on the knife, the cook, and the produce that week. Find yours by weighing.

  1. Weigh what you buy. Use one case or one box.
  2. Trim or cook it the way you do for service. Use the cook who does the job every day, not the chef on a calm morning.
  3. Weigh what you can use. Only the part that goes on the plate.
  4. Divide usable by bought. That share is your yield.
  5. Divide the price you paid by the usable weight. That is the price of a usable pound.

Do it again when you change supplier, brand, or cook. The number moves more than you think.

Cooking changes weight too. A short rib that goes into the braise heavy comes out lighter, because water leaves the meat. If you serve by cooked weight, cost it by cooked weight. Weigh the meat once before and once after, and write both numbers on the recipe card. Then the next cook does not have to guess.

How do you cost a sauce or stock made in a batch?

A sauce is its own little recipe. Cost the batch first. Then work out the cost of one portion. Then use that portion cost as a line in the plate that uses it.

Example: a batch of lime crema, made-up numbers, not typical
PartExample amountExample cost
Sour cream4 qt$12.00
Lime juice1 qt$5.00
Cilantro, after trimHalf a pound$4.00
Salt and spiceA small amount$1.00
Batch costThe batch makes 5 qt$22.00
Cost per quart22.00 divided by 5$4.40
Cost of 2 oz on a plate2 oz is one sixteenth of a quart$0.28 (rounded)

Now the plate. Say the crema goes on a plate of tacos. The tacos get one line that reads lime crema, 2 oz, at the cost in the last row of the table. You do not re-add the sour cream and limes on every plate.

Cost the batch you really make, at the amount it really yields. If a stock cooks down more than you planned, you get less of it. That makes each quart cost more. Weigh or measure the finished batch, not the pot you started with.

How does portion size change the cost?

A recipe card says two ounces. A cook with a big ladle gives three. Over a busy week that is a lot of crema, and the card never knew.

Put a number on every portion and give the cook a tool that matches it. A cook should not have to judge by eye in the middle of a Friday rush. Make the right amount the easy amount.

  • A scale for meat and fish, with a few plates weighed now and then on a busy night.
  • Scoops sized to the portion for rice, mashed potatoes, and sides.
  • Ladles marked at the right line for sauces.
  • Pre-portioned cups for dressings and crema.

When should you redo recipe costs?

A recipe cost is only true on the day you work it out. Redo it when something changes.

  • A big price change on a costly item such as salmon or short rib.
  • A recipe change. A new garnish or a bigger portion counts.
  • A new brand or pack size. The unit price and the yield both move.
  • A new cook on the station. Trim changes with the hand.
  • A new menu or a new season. It is a good time to look at every dish once.

If your overall number drifts, the food cost percentage formula shows how to spot it, and old recipe costs are one of the first places to look.

Where does recipe costing go wrong?

  • Costing the invoice price. Use the price of the part you can use.
  • Leaving out the small things. Oil, salt, a garnish, the paper cup. They add up.
  • Forgetting that sauces cost something. A house sauce is not free just because it is made in house.
  • Using the card’s batch size. Cost what the kitchen really makes.
  • Never updating. An old cost is a guess with a date on it.
  • Counting trim you throw away as if you reuse it. Only give credit for trim you really use, like bones for stock, and write it down.

How does Heard help with recipe costing?

You paste a recipe card and Heard reads it. It matches each ingredient to what you stock, asks about gaps like how much the recipe makes, and shows the plate cost. Nothing is added until you check it and tap Add to menu. Undo works. Read more on the import a recipe page.

Teaspoons of dry spices show in orange, so the chef can type a weight. Only managers can add a recipe. Once a dish is on the menu, Heard shows what share of the menu price the plate cost is. See the plate cost page.

You can start a 30-day free trial of Heard from the pricing page while our first 10 places last. The demo is a pretend kitchen with made-up people and numbers. Try the demo, pick Chef Maya, and ask “What does the burger cost us?”

Quick questions

What is recipe costing?

It is working out what a dish costs to make, using the part of each food you can really use, then adding the parts together.

What are yield and trim?

Trim is the part you cut away and do not use. Yield is the part you can use. Cost the usable part, not the whole case.

How do you cost a sauce made in a batch?

Add up the whole batch, divide by how much it really makes, then use the cost of one portion as a line in the plate.

Free tools: Plate cost calculator, Par level calculator